From Dan Rheaume, founder of Solar Blaster, after about 45 years in roofing
Most roofers sell from the roof. They climb up, look at the shingles, measure, and write a bid. That's exactly what every other contractor the homeowner calls is going to do.
Early in my career I started doing something different. I went into the attic first, and my sales went way up. No one else was doing it.
Why the attic tells the real story
The roof surface only shows you half the picture. The attic shows you what the roof is actually doing to the house. When I went up there, I checked for these, in this order:
- Ventilation. Is there enough intake and exhaust? Is the air moving evenly, or is there one vent working against a dead corner? Poor ventilation is behind many of the other problems you'll find.
- Mold and moisture. Staining, dark spots on the sheathing, frost in winter, or a damp smell all point to trapped moisture.
- Damaged decking. Soft, delaminated or rotted plywood that you'd never see from the top side.
- Anything else. Thin or crushed insulation, disconnected bath fans venting into the attic, daylight where there shouldn't be any, and signs of pests or leaks.
Why it wins jobs
When you come down from the attic with photos and a clear explanation, you're no longer just one more bid. You're the contractor who found the problem. Homeowners trust what they can see, and they remember who took the time to look. Your bid is now based on the whole roof system, not just the shingles, and the conversation shifts from price to fixing the problem right.
It also sets up the right fix. If ventilation is the root cause, you can solve it at the source with properly balanced intake and exhaust. That's why I built Solar Blaster around several small solar fans spread across the roof. They give the attic uniform, balanced airflow instead of one fan pulling from one spot.
Turning inspections into extra income
The attic inspection paid off in another way I didn't expect. Many attics I looked at needed more insulation, which isn't roofing work. So I partnered with an insulation contractor. I referred those jobs to him, and he paid me ten percent on every job I sent his way. The homeowner got a trusted referral, the insulation contractor got work, and I got paid for something I was already looking at.
Start with the attic
If you're a roofing contractor looking for an edge, it's sitting right above your customer's ceiling. Inspect the attic first. Check ventilation, moisture, decking and everything else. Show the homeowner what you found. It's the simplest way I know to stand out from the competition.
To see how Solar Blaster solar-powered vents, Assembled in America, give an attic balanced ventilation, visit solarblasterfans.com.
Solar Blaster: Powered by the Sun.
That low-intake, high-exhaust airflow is clothesline fresh air: "Our products move air, which is a natural cleanser. Clothesline fresh."
Turtle vents are the most common residential roof vent. On a re-roof, you can pull them out and slip Solar Blaster vents into the same openings, so no new holes are needed.