Free US shipping on orders over $144.98 to the lower 48 states*.

Shed Air Exchange

Shed Ventilation Calculator

How Fast Is the Air in Your Shed Replaced?

A big CFM number does not tell you much. What matters is how many minutes it takes to swap out all the hot, damp air inside your shed for clothesline fresh air — coming in low, going out high, just like your home.

Shop Shed Vents Call 480-747-7097

The Core Principle: Cool Air In Low, Hot Air Out High

A shed breathes the same way a house does. In a home, cooler air comes in at the eaves and hot air leaves at the ridge. In a shed, intake vents go low on the walls and the Solar Blaster exhaust goes high on the roof. Same principle. Different building.

Hot air rises. That is the whole lesson of a hot air balloon, and it is why the exhaust belongs up high. Fresh air has to come in down low to take its place. We call the result clothesline fresh air — the same way a sheet hung outside comes back smelling like nothing but clean air.

Gable vents are not convective

Most prefab sheds ship with a gable vent on each end. Those vents are not convective. They only move air when the wind blows through them in the right direction. On a still, hot afternoon they do nothing. Without low intake, a gable vent is just an opening at the peak watching trapped heat sit there.

Solar Blaster: convection, then a solar boost

Solar Blaster vents bring in clothesline fresh air by natural convection: intake low, exhaust high, so hot air rises out on its own — even when there is no wind. When the sun hits the panel, a solar fan boosts that airflow. When the sun is not out, the vent still works as a passive, convective vent.

Enter Your Shed Size

Length, width, and wall height. Add a roof style if you want the volume under a gable or gambrel included.

Height to the eave, or a flat-roof ceiling.
From the floor to the ridge, not just the rise.

Metal roof and no ridge vent yet? You can always create a ridge vent opening, the same way residential customers do, and put in a Solar Metal RidgeBlaster. Call Dan at 480-747-7097 and we’ll walk you through it.

The simple math

Shed volume (cu ft) ÷ total fan CFM = minutes per full air change

Air changes per hour = (total CFM × 60) ÷ volume. Lower minutes are better.

Shed special

Buy any 2 shed solar vents or LightBlaster skylights, get a free 2.5" intake 4-pack. Add the 4-pack to your cart and use code SHEDINTAKE at checkout.

Qualifying: Solar RoofBlaster, Mega RoofBlaster, Mega RoofBlaster Adjustable, RidgeBlaster, Metal RidgeBlaster, and LightBlaster for Shingled, Metal Roof, or Flat Roof Sheds (mix and match). One free 4-pack per order.

What Is a Good Target?

There is no building code that sets a fan speed or an air-change rate for sheds. We say that plainly in our article on shed ventilation.

This calculator uses a practical target of about 12 minutes per full air change in full sun — the same replenishment target we use on our Container Air Exchange page, where a recommended setup lands around 12 minutes. It also lines up with our published product yardstick: one Mega RoofBlaster (96 CFM) refreshes a 1,000 cu ft space every 10.4 minutes, and a 10×12 shed at 8 ft is about 10 minutes with one Mega.

For vent opening area, not fan CFM, our shed article applies the attic rule in IRC R806.2: a minimum of 1 square foot of net free ventilation area for every 150 square feet of floor, which may be 1/300 when intake and exhaust are balanced. That is a starting point for how much open vent area a shed should have, not a required number of minutes.

Why Intake Vents Matter

Exhaust vents push air out. Intake vents let fresh air in. You need both. A shed with only exhaust — or with only gable vents at the peak — fights itself, and the fans move less air.

  • Use four 2.5" intake vents for each exhaust vent. Four 2.5" intakes come close to matching the exhaust. They do not need to be described as a perfect match.
  • Put them low on the shady side, about 10 inches above the ground (above the splash point), spaced along the wall.
  • Cool air comes in low, warms up, and rises out the Solar Blaster up high — the same eaves-and-ridge pattern as a house.
  • Gable vents already on the shed are wind-driven, not convective. Do not treat them as the low intake this system needs.

Buy two vents, get a 4-pack of intakes free. Use code SHEDINTAKE at checkout.

A single-vent order still pays $20 for a 4-pack. Two exhaust vents need eight intakes (four per vent): the free 4-pack covers four of them, so add one more 4-pack ($20) to complete the set. The same special already used on Conex orders now applies to shed exhaust vents too.

Heat and Moisture in a Closed Shed

On a hot day, air trapped in a shed has nowhere to go. Moisture from the ground and from whatever you store inside builds up. Metal tools rust, bags of concrete set up, and the air can get stale. Steady airflow helps reduce moisture and mold risk by swapping that air out before it sits.

A solar fan is not air conditioning. It cannot make a shed cooler than the air outside. It also does not fix roof leaks or wet ground. What it does is keep the air moving when the sun is working on the roof — and keep working as a passive vent when the sun is not out.

Our products move air, which is a natural cleanser. Clothesline fresh.

Sample Results for Common Shed Sizes

These three examples use a flat roof and an 8 ft wall height, so the volume is just length × width × 8. Minutes are rounded to the nearest minute. Target: about 12 minutes per full air change in full sun. Buy two vents, get a 4-pack of intakes free; a one-vent setup still pays $20 for its 4-pack.

8 × 10 × 8 ft — 80 sq ft floor, 640 cu ft

Setup Minutes ACH Intakes
1 Solar RoofBlaster (35.2 CFM) 18 min 3.3 4 intakes, one 4-pack at $20
2 Solar RoofBlasters (70.4 CFM) 9 min 6.6 8 intakes: 1 free 4-pack + 1 at $20
1 Solar Mega RoofBlaster (96 CFM) 7 min 9.0 4 intakes, one 4-pack at $20
2 Mega RoofBlasters (192 CFM) 3 min 18.0 8 intakes: 1 free 4-pack + 1 at $20
1 Solar RidgeBlaster (105.6 CFM, 3 × 35.2) 6 min 9.9 4 intakes, one 4-pack at $20
2 Solar RidgeBlasters (211.2 CFM) 3 min 19.8 8 intakes: 1 free 4-pack + 1 at $20
1 Solar Metal RidgeBlaster (35.2 CFM) 18 min 3.3 4 intakes, one 4-pack at $20
2 Solar Metal RidgeBlasters (70.4 CFM) 9 min 6.6 8 intakes: 1 free 4-pack + 1 at $20

Recommended: 1 Solar Mega RoofBlaster, about 7 minutes, 9.0 air changes per hour. Four 2.5" intakes come close to matching the exhaust — one 4-pack at $20. From $199.99 + $20 intakes. (Buy two vents, get a 4-pack of intakes free — this size only needs one vent to hit the 12-minute target.)

10 × 12 × 8 ft — 120 sq ft floor, 960 cu ft

Setup Minutes ACH Intakes
1 Solar RoofBlaster (35.2 CFM) 27 min 2.2 4 intakes, one 4-pack at $20
2 Solar RoofBlasters (70.4 CFM) 14 min 4.4 8 intakes: 1 free 4-pack + 1 at $20
1 Solar Mega RoofBlaster (96 CFM) 10 min 6.0 4 intakes, one 4-pack at $20
2 Mega RoofBlasters (192 CFM) 5 min 12.0 8 intakes: 1 free 4-pack + 1 at $20
1 Solar RidgeBlaster (105.6 CFM, 3 × 35.2) 9 min 6.6 4 intakes, one 4-pack at $20
2 Solar RidgeBlasters (211.2 CFM) 5 min 13.2 8 intakes: 1 free 4-pack + 1 at $20
1 Solar Metal RidgeBlaster (35.2 CFM) 27 min 2.2 4 intakes, one 4-pack at $20
2 Solar Metal RidgeBlasters (70.4 CFM) 14 min 4.4 8 intakes: 1 free 4-pack + 1 at $20

Recommended: 1 Solar Mega RoofBlaster, about 10 minutes, 6.0 air changes per hour. Four 2.5" intakes come close to matching the exhaust — one 4-pack at $20. From $199.99 + $20 intakes. If the shed already has a shingled ridge vent, 1 Solar RidgeBlaster is also under the target (about 9 minutes).

12 × 16 × 8 ft — 192 sq ft floor, 1,536 cu ft

Setup Minutes ACH Intakes
1 Solar RoofBlaster (35.2 CFM) 44 min 1.4 4 intakes, one 4-pack at $20
2 Solar RoofBlasters (70.4 CFM) 22 min 2.8 8 intakes: 1 free 4-pack + 1 at $20
1 Solar Mega RoofBlaster (96 CFM) 16 min 3.8 4 intakes, one 4-pack at $20 (misses the 12-minute target)
2 Mega RoofBlasters (192 CFM) 8 min 7.5 8 intakes: 1 free 4-pack + 1 more 4-pack at $20
1 Solar RidgeBlaster (105.6 CFM, 3 × 35.2) 15 min 4.1 4 intakes, one 4-pack at $20 (misses the 12-minute target)
2 Solar RidgeBlasters (211.2 CFM) 7 min 8.3 8 intakes: 1 free 4-pack + 1 at $20
1 Solar Metal RidgeBlaster (35.2 CFM) 44 min 1.4 4 intakes, one 4-pack at $20
2 Solar Metal RidgeBlasters (70.4 CFM) 22 min 2.8 8 intakes: 1 free 4-pack + 1 at $20

Recommended: 2 Solar Mega RoofBlasters, about 8 minutes, 7.5 air changes per hour, spread so air reaches the whole 16-ft length. Two vents need eight intakes: one 4-pack free, buy one more 4-pack for $20 to complete the eight. Four 2.5" intakes come close to matching each exhaust. From $399.98 + $20 intakes.

Built by a Roofer, for Roofers

About 45 Years of Roofing

Designed by a lifetime roofer who knows what a roof goes through.

Hybrid Vents

A solar fan when the sun is out, and a convective passive vent when it is not.

Assembled in USA

Our fans are assembled in the USA.

5-Year Warranty

Backed by a 5-year transferable warranty.

Ready to Let Your Shed Breathe?

Pick your exhaust vent, add four 2.5" intakes for each one, and put those intakes low on the shady side. Buy two vents, get a 4-pack of intakes free. Questions? Call Dan at 480-747-7097.

Shop Shed Vents Call 480-747-7097

Minutes are theoretical: shed volume ÷ published fan CFM, rounded to the nearest minute, assuming full sun and balanced low intake. Real results vary with intake placement, sunlight, temperature, and weather. There is no building code that sets a fan speed or an air-change rate for sheds. The 12-minute target matches the replenishment target on our Container Air Exchange page.